Lesson

Identify functional boundaries and needs for cross jurisdictional control required to implement adaptive signal control and transit signal priority systems.

Smart Corridor experience in Atlanta, Georgia


30 June 2010
Atlanta; Georgia; United States


Background (Show)

Lesson Learned

The following lessons were identified during the design and implementation process.

Identify functional boundaries and needs for cross jurisdictional control required to implement SCATS and TSP. During the planning phase each jurisdiction must agree on the control scheme and identify needs for cross-jurisdictional control at interconnected intersections.

Ensure that adequate infrastructure exists to support communications between the project intersections and the respective traffic control centers. It is important that each jurisdiction has field personnel involved who have a good understanding of the communications required to ensure the system is functional once complete. During the Atlanta Smart Corridor project, it was found that SCATS could use the existing fiber optic media installed for signal control, however, SCATS would need to operate on a separate channel. Depending on the type of existing signal systems, implementation of SCATS may require additional splicing and installation of dedicated fiber. SCATS and ACTRA signal systems, for example, cannot run on the same fiber.

Ensure control cabinets will be large enough to accommodate SCATS detection equipment. Type 336 cabinets do not have enough space for SCATS detector equipment and NEMA (National Electrical Manufacturers Association) cabinets cannot support the level of detection needed. Type 332 cabinets are best for intersections that require SCATS.

Identify back-up personnel for key project responsibilities. Multi-year projects should expect iterative staff changes as a course of business. A secondary representative should be identified for each key project position. Back-up personnel should be aware of the roles and responsibilities, and oversight needed to prevent certain aspects of the project from being overlooked or assumed completed by others.

The project evaluation report indicated that SCATS was successfully implemented and TSP was an effective low-cost improvement to bus operations. Evaluation results indicated the system improved mobility, reduced delay, and resulted in significant productively benefits for corridor travelers.


Lesson Comments

No comments posted to date

Comment on this Lesson

To comment on this lesson, fill in the information below and click on submit. An asterisk (*) indicates a required field. Your name and email address, if provided, will not be posted, but are to contact you, if needed to clarify your comments.



Source

Atlanta Smart Corridor Project Evaluation Report

Author: TransCore

Published By: Georgia Regional Transportation Authority

Prepared by TransCore for the Georgia Regional Transportation Authority

Source Date: 30 June 2010

Lesson Contacts

Lesson Analyst:

Mike Mercer
Noblis
(202) 863-3646
michael.mercer@noblis.org


Rating

Average User Rating

0 ( ratings)

Rate this Lesson

(click stars to rate)


Lesson ID: 2011-00596