Cost

The cost to implement a red-light extension (RLE) system on two major approaches to a single four-way signalized intersection was estimated at $16,500.

Experience assessing the accuracy and performance red-light extension (RLE) systems in Oregon.


January 2016


Summary Information

This research evaluated the implementation of a red-light extension (RLE) system to reduce red-light running (RLR) and improve safety at the intersection of US30 and Cornelius Pass Road in Portland, Oregon. The intersection operates with a 2070 controller and NWS Voyage™ firmware, and uses the NWS Voyage™ RLE function on through movements. RLE events are triggered by loop detectors located downstream from the stop line.

The table below excerpted from the source report provides an example calculation of the costs associated with the design and installation of a red clearance extension system.

ComponentApproximate Unit Price
2070 Signal controller with NWS Voyage™ firmware$4,500
Inductive loops$1,000 per approach*
RADAR$6,500 per approach*
Engineering time to configure settings and validate operations$1,500

* Assumes conduit in place, otherwise cost per approach could be an additional $5k to $20k.


System Cost Comments

No comments posted to date

Comment on this System Cost

To comment on this summary, fill in the information below and click on submit. An asterisk (*) indicates a required field. Your name and email address, if provided, will not be posted, but are to contact you, if needed to clarify your comments.



Source

Smart Red Clearance Extensions to Reduce Red-Light Running Crashes

Author: Hurwitz, David, et.al.

Published By: Oregon DOT and the USDOT FHWA

Source Date: January 2016

Other Reference Number: Repoty No. FHWA-OR-RD-16-10

URL: http://www.oregon.gov/ODOT/TD/TP_RES/docs/Reports/2016/SPR773_Smart_Red_Clearance.pdf

System Cost

RLE system upgrade: Approximately $8,250 per approach

Rating

Average User Rating

0 ( ratings)

Rate this System Cost

(click stars to rate)


Cost ID: 2017-00371