Conduct a site survey when developing a new signal timing plan.

Experience from a synthesis of signal timing projects.

July 2005
United States

Background (Show)

Lesson Learned

When developing new signal timing plans, conducting a site survey may be one of the most important steps of the process. Although it is possible to generate both local and coordinated signal timing parameters without ever seeing the intersection, this practice should be avoided. Physical constraints that may or may not be noted on a plan sheet, but that may have an obvious impact on traffic flow, are immediately obvious during a site survey. Vegetation sight distance obstructions, adverse approach grades and curvature, and fading pavement markings are examples of factors that affect traffic flow and that are apparent during a site survey.

On a shoestring budget, the site survey becomes absolutely vital to the process of developing a signal timing plan. The practitioner must carefully observe each of the intersections for several cycles during the period for which the signal timing plan is being developed. Specific issues to look for are unusual demand conditions, pedestrian demands, and any congested movements. The practitioner will need to estimate the average speed for the traffic between intersections on the artery, and depending on what data are available, may need to measure the distance between intersections. The primary output of the site visit is the identification of the primary intersection of the group.

The following lessons learned are presented with regard to conducting the site survey:
  • Conduct the site survey after all the existing data have been collected and organized. In this way, the site visit can be used to confirm the accuracy of the existing data and to collect any additional data that may be needed.
  • Visit each intersection during the hours for which the timing plan is being developed. For example, if four timing plans are being developed, then the site should be visited during the peak AM period, during a typical day period, during the peak PM period, and during a low volume night period. Site visits during extreme conditions of high and low traffic will provide useful insights into signal operations.
  • Collect (or verify) the following information:
    • Condition diagram. The diagram should include an intersection sketch, approach lane configurations, sight distance restrictions, and curb restrictions.
    • Phasing diagram. The phasing diagram should include the National Electrical Manufacturers Association (NEMA) phase number for each phase movement and should identify the NEMA phase number with the corresponding traffic movement by direction.
    • Detector locations. Existing detector locations, type and phase assignment data are necessary to determine the phase interval settings.
    • Existing controller settings. The practitioner should assess whether or not the settings are reasonable for traffic conditions and should reconcile any differences among the different sets of local controller timing data.
    • Traffic flow. The practitioner should record the typical free flow speed observed on each link and for different timing plans. In addition, it is practical to verify information on link length.
Conducting a site survey is critical to the process of developing a signal timing plan, particularly if the budget is minimal. The site visit enables the practitioner to identify unusual demand conditions and frequently exposes additional issues that can be addressed with new timing plans. On a low budget, the practitioner does not have the analytical tools to evaluate intersection performance, so the observations and experience during the site visit must serve as a substitute. The site visit provides valuable information that enables practitioners to develop signal timing plans that maximize operational efficiency on the arterial, resulting in mobility benefits to the user.

Lesson Comments

No comments posted to date

Comment on this Lesson

To comment on this lesson, fill in the information below and click on submit. An asterisk (*) indicates a required field. Your name and email address, if provided, will not be posted, but are to contact you, if needed to clarify your comments.


Signal Timing on a Shoestring

Author: Sabra, Wang and Associates

Published By: Federal Highway Administration

Source Date: July 2005

URL: http://ops.fhwa.dot.gov/publications/signal_timing/00_index.htm

Other Lessons From this Source

Lesson Contacts

Lesson Contact(s):

David Henry
Sabra-Wang and Associates

Agency Contact(s):

Eddie Curtis

Lesson Analyst:

Margaret Petrella
RITA/Volpe National Transportation Systems Center


Average User Rating

0 ( ratings)

Rate this Lesson

(click stars to rate)

Lesson Categories

None defined

Application Areas

None defined


None defined


United States

Focus Areas

None defined

Goal Areas



None defined

Lesson ID: 2007-00387