Lesson

Connected vehicles should rely on more than one data feed to determine accurate location and speed

NYCDOT’s first demonstration of the NYC Connected Vehicle Pilot Deployment's applications to the general public produces valuable lessons learned for the deployment team



Background (Show)

Lesson Learned

The New York City Connected Vehicle Pilot Deployment (NYC CVPD) was demonstrated to participants at the Intelligent Transportation Society of New York (ITS-NY) Annual Meeting and Technology Exhibition in Saratoga Springs, NY on June 13 & 14, 2018. The New York City Department of Transportation (NYC DOT) offered attendees a drive along demonstration. Vehicles installed with a Dedicated Short-Range Communications (DSRC) Aftermarket Safety Device (ASD) were driven on the roadway surrounding the meeting hotel.

Multiple DSRC ASD Vehicle-to-Vehicle (V2V) applications were demonstrated:
  • Blind Spot Warning (BSW) – Alerts the driver of vehicles alongside the car as they are accelerating and passing from your left side.
  • Electronic Emergency Brake Light (EEBL) – Warns the driver of a hard braking event in front of the vehicle to encourage a deceleration. EEBL functions even when the driver's view is obstructed by other vehicles or poor visibility.
  • Forward Collision Warning (FCW) – Alerts the driver of a potential collision with a slower moving or stationary car located in the path of the vehicle.
  • Intersection Movement Assist (IMA) – Warns the driver, when approaching an intersection, if another vehicle is entering the intersection and there is a potential conflict.

This was the first demonstration to the general public offered by NYC DOT of the NYC CVPD applications, and during the course of the two days, approximately eight drive along demonstrations were performed.

Lessons Learned from the Demonstration

Use more than one data feed, e.g, augment the GNSS signals with tethering and deployment of RSUs
    When deployed, the NYC CVPD will rely on multiple data feeds to determine location and speed. The NYC CVPD will augment Global Navigation Satellite System (GNSS) data with triangulation from the RSU signals and in addition, the ASD will be tethered to the vehicle. Tethering taps the ASD into the CANBUS to acquire speed data directly from the vehicle allowing it to make use of dead reckoning. For the demonstration, the vehicles were untethered and relied solely upon reception of GNSS signals to determine the speed and location.

Ensure there is adequate sky visibility
    Unfortunately, the designated roadway for the demonstrations had thick tree coverage. The lack of open sky disrupted the GNSS signals and therefore the applications were unreliable. In the future, it is important to augment the GNSS signals with tethering and deployment of RSUs. At a minimum, ensure the vehicles are tested on the selected roadway prior to the event to ensure there is adequate sky visibility to allow the ASD to acquire GNSS signals.

Use a close course with sufficient length to perform all maneuvers
    Due to the lack of sky visibility, the demonstration was moved to a secondary roadway that was not a closed course. This roadway was open to the public and was accessible by joggers, walkers, parents with strollers, golfers and dogs. Other vehicles also utilized the roadway. To ensure the safety of all the participants, ideally the roadway would be closed to the public.

    Another impact from the change in roadways was that the new course used for the demonstration was smaller than ideal to safely perform all of the maneuvers for the applications. This required "tuning" or adjusting the applications being demonstrated to operate at slower speeds – where the time-to-collision is longer and the rate of deceleration is lower - which, under normal circumstances, would lead to too many false alarms. These parameter adjustments were made during the demonstrations to both the Host and Remote vehicle speed thresholds in order to simulate the safety application effectively in the test roadway. This reinforces the need for multiple tests of the applications to ensure that the ASDs function properly in the demonstration environment.
Consider using professional drivers
    A final lesson learned is that there are risks involved in driving members of the general public when trying to trigger the ASD safety applications. For best results, it is recommended to utilize professional drivers or provide adequate training prior to the demonstrations.

Overall, the demonstration was an excellent learning experience for the entire NYC CVPD project team and the participants were impressed by the deployment of the V2V applications.


Lesson Comments

No comments posted to date

Comment on this Lesson

To comment on this lesson, fill in the information below and click on submit. An asterisk (*) indicates a required field. Your name and email address, if provided, will not be posted, but are to contact you, if needed to clarify your comments.



Source

Connected Vehicle Pilot Deployment Program: Success Stories

Author: Glassco, Rick; James O'Hara; Barbara Staples; Kathy Thompson; and Peiwei Wang

Published By: USDOT Office of the Secretary for Research and Deployment

URL: https://www.its.dot.gov/pilots/success_lessonslearned.htm

Other Lessons From this Source

Lesson Contacts

Lesson Analyst:

Kathy Thompson


Rating

Average User Rating

0 ( ratings)

Rate this Lesson

(click stars to rate)


Lessons From This Source

Allow for increased coordination with the Interdepartmental Radio Advisory Committee (IRAC) early on in the DSRC licensing process to help reduce what is traditionally a very lengthy process.

Connected Vehicle Pilot Deployment Program yields program management best practices for integrating and testing large disparate systems.

Connected vehicles should rely on more than one data feed to determine accurate location and speed

Consider installing additional vehicle detection equipment if it is determined that there is not sufficient market penetration for CV traffic signal control applications to work at their full potential

Facing a gap in standards interpretation, the Tampa and New York City Connected Vehicle Pilot Sites worked together to harmonize message structure for pedestrian safety applications.

For pedestrian safety warning applications, opt to collect pedestrian location data from LIDAR sensors instead of pedestrian mobile devices that often have insufficient accuracy.

Incentivize participation in CV deployments through benefits such as toll discounts

Include technical, operations, and legal personnel in stakeholder meetings to address the requirements of the CV deployment and ensure that participants' privacy is being maintained

Incorporate standardized over-the-air update procedures to permit efficient firmware updates for connected vehicle devices.

Obtain working prototypes of CV applications from the USDOT’s Open Source Application Data Portal (OSADP) to prevent time spent doing duplicative software development

Prevent the need for channel switching (a safety hazard) by designing CV communications to include dual radios in each vehicle

Publish all CV planning documentation to serve as an example for other early deployers to follow

The USDOT’s three Connected Vehicle Pilots successfully demonstrate cross-site over-the-air interoperability among six participating vendors.

Use local student mechanics where possible to perform CV equipment installations to provide students with required trainee experience and to contain costs

Use on-board connected vehicle (CV) technology and SPaT / MAP infrastructure messages to prevent wrong way entries on reversible express lanes.

When installing antennas on streetcars to support wireless connected vehicle applications, verify that radio performance is not compromised by interference from high-voltage power lines.

States

None defined

Countries

None defined

Systems Engineering

Show the V

None defined

Focus Areas

None defined

Goal Areas

Safety

Keywords

None defined

Lesson ID: 2018-00841